How-to
How to Measure Your Face for Sunglasses at Home
GlareBear November 15, 2026 3 min read
The short answer
Hold a ruler across your face at temple level in a mirror and read the distance between your temples. Most adult faces measure about 125 to 145 mm. Look for a frame whose whole front is close to that width: roughly two lens widths plus the bridge plus a few millimetres. If you own a pair that fits, its printed lens width is an even better guide.

What you need
- A ruler marked in millimetres, or a credit card (it is 85.6 mm long, which makes a handy check).
- A mirror, or a friend.
- A pair you already own, if you have one that fits well.
Step by step
- Stand square to the mirror and look straight ahead.
- Hold the ruler flat across your face, just in front of your eyebrows, at the level where the arms of a pair would pass your temples.
- Read the distance from one temple to the other. This is your face width, the number a frame front should roughly match.
- Now measure the gap between your eyes at the top of your nose, where a bridge would sit. This helps you judge the bridge number.
- Write both down. Measure twice, because a millimetre or two of difference matters.
If you have a pair that fits, skip most of this. Look inside one arm for three numbers such as 55-19-140 and keep the first two. Our guide to reading sunglasses sizes explains each one.
Turning face width into a lens width
Makers print the lens width, not the width of the whole front. The front is roughly two lens widths plus the bridge, plus a few millimetres of frame at each side. This table is a rough starting point, not a rule, because shape and rim thickness change the total.
| Your face width | Lens width to look at first | Fit filter on our pages |
|---|---|---|
| Under about 130 mm | About 48 to 51 mm | Narrow |
| About 130 to 138 mm | About 52 to 56 mm | Medium |
| About 139 mm and up | About 57 mm and up | Wide |
The bridge number matters too. A narrow nose usually suits a smaller bridge, and a wide or low nose bridge a larger one or adjustable nose pads.
Check the result
When a pair fits, the frame is about as wide as your face, your eyes sit near the middle of each lens, and the arms reach your ears without pressing. Our guide on how to tell if sunglasses fit has a quick mirror test. Many GlareBear pages also show a to-scale Fit guide, and some have a Try on button that shows the frame on your face with your camera. When you have your number, browse women's, men's or unisex sunglasses and use the Fit filter.
More guides
- Acetate vs Metal Sunglasses Frames: How to ChooseAcetate frames are thicker and hold rich colour. Metal frames are thinner and usually have adjustable nose pads. How to pick between them.Read the guide
- Shield and Wraparound Sunglasses, ExplainedShield sunglasses use one lens across both eyes. Wraparounds curve around the face. How they differ, how sizes work and who each one suits.Read the guide
- Sunglasses for Wide Faces: Sizes That WorkSunglasses for wide faces and larger heads: the lens widths and arm lengths that fit without pinching, and the shapes that look in proportion.Read the guide